Setting GPS tracker di gps-trace.com

Xexun TK-102

Personal GPS tracker Xexun TK-102. Manufactor - Xexun

Supported capabilities:

    Communication via TCP
    Digital sensors
    ADC sensors
    Remote management through SMS channel
    Reading incoming SMS messages
    Remote management through GPRS channel
In configuration software or file of Xexun TK-102 tracker use following settings to connect it to free GPS tracking system GPS-Trace Orange:

Server IP:	193.193.165.166
Server port:	20157
Server phone number:	+447624804309

In order GPS-Trace Orange free GPS tracking service to correctly identify incoming data from Xexun TK-102 tracker in the settings use following parameters:

Unique ID:	IMEI (15 digits)
Phone number:	Phone number of device's SIM card in the international format, starting from '+'

In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:

• "begin123456" - resets all controller's settings, password 123456 is set by default
• make a call to the controller, which should wait untill two beeps, break the call and send SMS with it's coordinates
• "apn123456 telkomsel" - sets the required apn for gprs configuration
• "apnuser123456 wap" - sets the user for gprs configuration
• "apnpasswd123456 wap123" - sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts"
• "GPRS123456" - we're setting GPRS mode
• "adminip123456 <IP> 20157" - sets the server's address for packages sending, <IP> replace for IP of monitoring system contoh adminip123456 193.193.165.166 20157
• "t030s***n123456" - sets the interval of messages sending to 30 seconds.
• Untuk membalikan ke sms Mode ketik noadminip123456